GS-1210-10/ME

Technical Specifications

General

Hardware Version: Rev. B

10/100/1000 Ports:
• DGS-1210-10/ME and DGS-1210-10P/ME: 8
• DGS-1210-28/ME and DGS-1210-28P/ME: 24
• DGS-1210-52/ME and DGS-1210-52MP/ME: 48

Gigabit SFP Ports:
• DGS-1210-10/ME and DGS-1210-10P/ME: 2
• DGS-1210-28/ME and DGS-1210-28P/ME: 4
• DGS-1210-52/ME and DGS-1210-52MP/ME: 4

Console Port: RJ-45

Port Standards & Functions:
• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3az compliance
• Auto-negotiation
• IEEE 802.3x Flow Control
• IEEE 802.3z 1000BASE-X Gigabit Fiber

Network Cables:
• UTP Cat. 5, Cat. 5e (100 m max.)

Full/Half Duplex:
• Full/half-duplex for 10/100 Mbps speeds
• Full-duplex for 1000 Mbps speed

Media Interface Exchange:
• Auto MDI/MDIX adjustment for all twisted-pair ports

Power Surge Protection:
• All Gigabit Ethernet ports support IEC 61000-4-5 surge protection²

Performance

Switching Capacity:
• DGS-1210-10/ME and DGS-1210-10P/ME: 20 Gbps
• DGS-1210-28/ME and DGS-1210-28P/ME: 56 Gbps
• DGS-1210-52/ME and DGS-1210-52MP/ME: 104 Gbps

64-byte Max. Forwarding Rate:
• DGS-1210-10/ME and DGS-1210-10P/ME: 14.88 Mpps
• DGS-1210-28/ME and DGS-1210-28P/ME: 41.7 Mpps
• DGS-1210-52/ME and DGS-1210-52MP/ME: 77.4 Mpps

MAC Address Table Size: 16K Entries

CPU Memory: 256 MB DDR3

Packet Buffer:
• DGS-1210-10/ME and DGS-1210-10P/ME: 1.5 MB
• DGS-1210-28/ME and DGS-1210-28P/ME: 1.5 MB
• DGS-1210-52/ME and DGS-1210-52MP/ME: 3.0 MB

Flash Memory: 32 MB

Power over Ethernet (DGS-1210-10P/ME, DGS-1210-28P/ME, DGS-1210-52MP/ME only)

PoE Standards: 802.3af (PoE) / 802.3at (PoE+)

PoE Capable Ports
• DGS-1210-10P/ME: Ports 1 – 8 (PoE+)
• DGS-1210-28P/ME: Ports 1 – 24 (PoE+)
• DGS-1210-52MP/ME: Ports 1 – 8 (PoE+), Ports 9 -48 (PoE)

PoE Power Budget:
• DGS-1210-10P/ME: 78 W
• DGS-1210-28P/ME: 193 W
• DGS-1210-52MP/ME: 370 W

LEDs

Power (per device): Yes
Console (per device): Yes
Link/Activity/Speed (per port): Yes
Fan Error: Yes (DGS-1210-28P/ME, DGS-1210-52/ME, DGS-1210-52MP/ME only)

Physical & Environmental

Power Input:
• 100 to 240 VAC; 50 to 60 Hz
• Internal Power Supply

Optional Redundant Power Supply³
• DGS-1210-10/ME: DPS-200/200A or DPS-500A
• DGS-1210-10P/ME: N/A
• DGS-1210-28/ME: DPS-200/200A or DPS-500A
• DGS-1210-28P/ME: N/A
• DGS-1210-52/ME: DPS-200/200A or DPS-500A
• DGS-1210-52MP/ME: N/A

Max. Power Consumption
• DGS-1210-10/ME: 13.38W/100V, 13.59W/240V
• DGS-1210-10P/ME: 101.7W (PoE on), 17.9W (PoE off)
• DGS-1210-28/ME: 19.05W/100V, 19.14W/240V
• DGS-1210-28P/ME: 251.5W (PoE on), 28.7W (PoE off)
• DGS-1210-52/ME: 38.85W/100 V, 38.35W/240V
• DGS-1210-52MP/ME: 479.5W (PoE on), 54.4W (PoE off)

Standby Power Consumption
• DGS-1210-10/ME: 9.3W/100V, 11.1W/240V
• DGS-1210-10P/ME: 10.3W/100V, 11.1W/240V
• DGS-1210-28/ME: 7.87W/100V, 8.21W/240V
• DGS-1210-28P/ME: 18.4W/100V, 16.1/240V
• DGS-1210-52/ME: 21.72W/100V, 21.49W/240V
• DGS-1210-52MP/ME: 33W/100V, 31.6W/240V

Ventilation
• DGS-1210-10/ME: Fanless
• DGS-1210-10P/ME: Fanless
• DGS-1210-28/ME: Fanless
• DGS-1210-28P/ME: (2) Smart Fans
• DGS-1210-52/ME: (1) Smart Fan
• DGS-1210-52MP/ME: (3) Smart Fan

Acoustics
• DGS-1210-10/ME: 0 dB(A)
• DGS-1210-10P/ME: 0 dB(A)
• DGS-1210-28/ME: 0 dB(A)
• DGS-1210-28P/ME: High speed: 52.9 dB(A), Low Speed: 45.3 dB(A)
• DGS-1210-52/ME: High speed: 49 dB(A), Low Speed: 40 dB(A)
• DGS-1210-52MP/ME: High speed: 50.1 dB(A), Low Speed: 40.4 dB(A)

Heat Dissipation
• DGS-1210-10/ME: 46.35 BTU/hr
• DGS-1210-10P/ME: 307.70 BTU/hr
• DGS-1210-28/ME: 60.12 BTU/hr
• DGS-1210-28P/ME: 857.98 BTU/hr
• DGS-1210-52/ME: 132.08 BTU/hr
• DGS-1210-52MP/ME: 1636.16 BTU/hr

Operating Temperature: 23°F to 122°F (-5°C to 50°C)
Storage Temperature: -40°F to 158°F (-40°C to 70°C)
Operating Humidity: 10% to 90% non-condensing
Storage Humidity: 5% to 90% non-condensing

Dimensions (W x D x H)
• DGS-1210-10/ME: 11.0” x 5.0” x 1.73”, (280 x 126 x 44 mm)
• DGS-1210-10P/ME: 11.0” x 7.1” x 1.73”, (280 x 180 x 44 mm)
• DGS-1210-28/ME: 17.32” x 5.5” x 1.73”, (440 x 140 x 44 mm)
• DGS-1210-28P/ME: 17.32” x 8.27” x 1.73”, (440 x 210 x 44 mm)
• DGS-1210-52/ME: 17.32” x 8.27” x 1.73”, (440 x 210 x 44 mm)
• DGS-1210-52MP/ME: 17.32” x 16.9” x 1.73”, (440 x 430 x 44 mm)

Weight
• DGS-1210-10/ME: 2.3 lbs (1.05 kg)
• DGS-1210-10P/ME: 4.2 lbs (1.92 kg)
• DGS-1210-28/ME: 5.1 lbs (2.21 kg)
• DGS-1210-28P/ME: 7.36 lbs (3.34 kg)
• DGS-1210-52/ME: 7.3 lbs (3.31 kg)
• DGS-1210-52MP/ME: 13.3 lbs (6.04 kg)

MTBF
• DGS-1210-10/ME: 412,956 hours
• DGS-1210-10P/ME: 315,336 hours
• DGS-1210-28/ME: 497.918 hours
• DGS-1210-28P/ME: 331,699 hours
• DGS-1210-52/ME: 381,999 hours
• DGS-1210-52MP/ME: 272,910 hours

EMI Certifications: FCC class A, CE class A, VCCI, BSMI, CCC
Safety Certifications: CE, LVD, UL, CB

Software Features – All Models

L2 Features
• MAC address table: 16K entries
• Spanning Tree Protocols
• 802.1D STP
• 802.1w RSTP
• 802.1s MSTP
• BPDU filtering
• Root restriction
• Loopback detection
• ITU-T G.8032 ERPS
• Mirroring
• Support 1 mirroring group
• Support One-to-One, Many-to-One, Flow-based (ACL) mirroring for ingress traffic
• L2 Protocol Tunneling (L2PT)
• Link aggregation
• Compliant with 802.3ad
• Supports max. 8 groups, 8 ports per group

L2 Multicasting
• IGMP Snooping
• IGMP v1/v2 snooping, v3 awareness
• IGMP authentication/filtering
• Supports 256 groups
• VLAN/host-based IGMP snooping fast leave
• Report suppression
• MLD Snooping
• MLD v1, MLD v2 awareness
• Supports 256 groups

VLAN
• 802.1Q tagged VLAN
• VLAN group
• Max. 4094 VLAN groups
• Port-based VLAN
• GVRP
• Asymmetric VLAN
• Max. 256 dynamic VLAN
• 802.1v protocol VLAN
• VLAN trunking
• MAC-based VLAN
• Port-based Q-in-Q
• ISM VLAN (multicast VLAN)
• Private VLAN

L3 Features
• Max. 256 ARP entries
• Supports 255 static ARP entries
• Static route
• 64 IPv4 static routes
• 32 IPv6 static routes
• Supports Gratuitous ARP
• Default route

Quality of Service (QoS)
• CoS based on:
• Switch port
• 802.1p priority queues
• VLAN ID
• MAC address
• IPv4/IPv6 address
• DSCP
• TOS
• Protocol type
• TCP/UDP port
• IPv6 traffic class
• Bandwidth control
• Port-based (ingress, min. granularity 64 Kbps)
• Flow-based (ingress, min. granularity 64 Kbps)
• Egress queue bandwidth control (min. granularity 64 Kbps)
• Queue handling
• Strict priority
• Weighted Round Robin (WRR)
• 8 outbound queues

Access Control List (ACL)
• ACL based on
• Switch port
• 802.1p priority
• VLAN ID
• MAC address
• EtherType
• TOS
• IPv4/v6 address
• DSCP
• Protocol type
• IPv4/IPv6 TCP/UDP port number
• ICMP
• IPv6 traffic class
• Up to 256 ingress access rules
• ACL action (permit/deny/mirror)
• Time-based ACL
• ACL statistics
• CPU interface filtering

Authentication, Authorization, and Accounting (AAA)
• 802.1X
• Host-based access control
• Port-based access control
• Guest VLAN
• Host-based MAC authentication
• RADIUS accounting
• TACACS+ accounting
• User account privilege (4 level user access)
• MAC-based access control
• Max. 512 entries when using local database
• Authentication for management access
• Local, RADIUS, TACACS+ database

Security Features
• SSH v2
• SSL v1/2/3
• Port security (Up to 64 MAC addresses per port)
• IP-MAC-Port Binding (IMPB)
• ARP inspection
• IP inspection
• IPv6 DHCP snooping
• Broadcast/Multicast/Unicast storm control
• D-Link Safeguard Engine
• DHCP server screening
• DHCP client filtering
• BPDU attack protection
• DoS attack prevention
• Traffic segmentation

Operations, Administration, and Maintenance (OAM)
• 802.3ah Ethernet Link OAM
• Supports 802.3ah link layer remote loopback and discovery (System log and SNMP)
• 802.3ah D-Link extension: D-link Unidirectional Link Detection (DULD), (System log and SNMP)
• Cable diagnostics
• Dying Gasp
• Supports optical transceiver digital diagnostics monitoring (DDM)

Management
• Web-based GUI (IPv4/IPv6)
• Command Line Interface (CLI)
• Telnet Server/Client (Support IPv4/IPv6)
• TFTP client (IPv4)
• Command logging
• SNMP v1/v2c/v3
• SNMP traps
• System log
• RMON v1
• RMON v2
• LLDP
• BootP/DHCP client
• DHCP auto-configuration
• Text-editable config file
• Trusted host
• DHCP relay (IPv4/IPv6)
• DHCP relay agent/local relay
• DHCP relay option 12, 18, 37, 38, 82
• PPPoE Circult-ID tag insertion
• Trap/alarm/log severity control
• CPU monitoring
• SNTP
• LLDP-MED (for PoE models only)
• Password encryption

MIB
• RFC1212 Concise MIB Definitions
• RFC1213 MIB II
• RFC1215 MIB Traps Convention
• RFC1065, 1151, 2578 MIB Structure
• RFC1493 Bridge MIB
• RFC1157, 2573, 2575, 2576 SNMP MIB
• RFC3418 SNMPv2 MIB
• RFC2819 RMON MIB
• RFC2021 RMONv2 MIB
• RFC1643, 1650, 2665 Ether-like MIB
• RFC2674 802.1p MIB
• RFC 2233 Interface Group MIB
• RFC 2618 RADIUS authentication client MIB
• RFC 2620 RADIUS accounting client MIB
• RFC3289 D-Link Zone Defense MIB
• RFC4022 MIB for TCP
• RFC4113 MIB for UDP
• PoE MIB
• DDP MIB
• LLDP-MED MIB

IETF Standard
• RFC768 UDP
• RFC791 IP
• RFC792 ICMPv4
• RFC2463, 4443 ICMPv6
• RFC793 TCP
• RFC826 ARP
• RFC1321, 2284, 2865, 2716, 3580 Extensible Authentication Protocol (EAP)

IPv6
• RFC1981 Path MTU Discovery
• RFC2460 IPv6
• RFC2461, 4861 Neighbor Discovery
• RFC2462, 4862 IPv6 Stateless Address Auto-configuration
• RFC2893, 4213 IPv4/IPv6 dual stack function

Ordering Information

Product
• DGS-1210-10/ME 8 10/100/1000BASE-T and 2 1G SFP Ports L2 Managed Switch (Lifetime Warranty¹)
• DGS-1210-10P/ME 8 10/100/1000BASE-T PoE and 2 1G SFP Ports L2 Managed Switch, 78W PoE Budget (Lifetime Warranty¹)
• DGS-1210-28/ME 24 10/100/1000BASE-T and 4 1G SFP Ports L2 Managed Switch (Lifetime Warranty¹)
• DGS-1210-28P/ME 24 10/100/1000BASE-T PoE and 4 1G SFP Ports L2 Managed Switch, 193W PoE Budget (Lifetime Warranty¹)
• DGS-1210-52/ME 48 10/100/1000BASE-T and 4 1G SFP Ports L2 Managed Switch (Lifetime Warranty¹)
• DGS-1210-52MP/ME 48 10/100/1000BASE-T PoE and 4 1G SFP Ports L2 Managed Switch, 370W PoE Budget (Lifetime Warranty¹)

Redundant Power Supply (for non-PoE Models only)
• DPS-200A Redundant Power Supply Unit, 60 Watts
• DPS-500A Redundant Power Supply Unit, 140 Watts
• DPS-CB150-2PS 150 cm RPS cable for connecting DGS-1210-10/ME, 28/ME, 52/ME to DPS-200A/500A

Optional 1 Gbps SFP Transceivers
• DEM-712 1000BASE-T SFP Transceiver
• DEM-310GT 1000BASE-LX SFP Transceiver, Single-mode
• DEM-311GT 1000BASE-SX SFP Transceiver, Mulitmode

¹ Lifetime Warranty available in U.S.A. only. Lifetime Warranty void when not purchased from Authorized US D-Link Reseller. Please visit us.dlink.com for list of
Authorized US Resellers.
² All 10/100/1000 Gigabit Ethernet ports of the DGS-1210/ME Series switches support up to 6 kV surge protection.
³ Each DPS-200/200A/500 power supply can support up to two (2) switches when using the DPS-CB150-2PS cable. Check maximum power draw for each switch to
ensure the correct supply is used and sufficient power is available. For example, to power two (2) DGS-1210-52/ME switches, the DPS-500A would be required.