MR84-HW CISCO MERAKI MR84

₫0

Mô tả MR84-HW Cisco Meraki MR84:

MR84 and Meraki cloud management: A powerful combination. Management of the MR84 is handled through the Meraki dashboard, an intuitive browser-based interface that enables rapid deployment across multiple sites without the need for time-consuming training or costly certifications. Since the MR84 is self- configuring and managed over the web, it can be deployed at a remote location in a matter of minutes, even without on-site IT staff.
24×7 monitoring via the Meraki cloud delivers real-time alerts if the network encounters problems. Remote diagnostic tools enable immediate troubleshooting so that distributed networks can be managed with a minimum of hassle.
The MR84’s firmware is automatically kept up to date via the cloud. New features, bug fixes, and enhancements are delivered seamlessly over the web. This means no manual software updates to download or missing security patches to worry about.

Mô tả

MR84 Specifications
Radios	2.4 GHz 802.11b/g/n/ac client access radio 5 GHz 802.11a/n/ac client access radio 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and scanning support Concurrent operations of all four radios Supported frequency bands (country-specific restrictions apply): 2.412-2.484 GHz 5.150-5.250 GHz (UNII-1) 5.250-5.350 GHZ (UNII-2) 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 5.725 -5.825 GHz (UNII-3)
802.11ac Wave 2 and 802.11n Capabilities	4 x 4 multiple input, multiple output (MIMO) with four spatial streams SU-MIMO and MU-MIMO support Maximal ratio combining (MRC) & beamforming 20 and 40 MHz channels (802.11n), 20, 40, 80, 160, 80 + 80 MHz channels (802.11ac) Up to 256-QAM on both 2.4 GHz & 5 GHz bands Packet aggregation
Power	Power over Ethernet: 37 – 57 V (802.3at required with functionality-restricted 802.3af mode supported) Power consumption: 21W max (802.3at) Power over Ethernet injector sold separately
Mounting	Mounts to walls and vertical poles. Mounting hardware included
Physical Security	Security screw included Concealed mount plate
Environment	Operating temperature: -40 °F to 131 °F (-40 °C to 55 °C) Humidity: 5 to 95% non-condensing IP67 environmental rating
Physical Dimensions	28.6 cm x 17.6 cm x 18.5 cm including mounting bracket Weight: 3.8 lbs. (1.7 kg)
Interfaces	1x 100/1000/2.5G BASE-T Ethernet & 1x 10/100/1000 BASE-T Ethernet (RJ45) Four external N-type female antenna connectors
Security	Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP and AES encryption Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service	Advanced Power Save (U-APSD) WMM Access Categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping
Mobility	PMK, OKC, & 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming
Analytics	Embedded location analytics reporting and device tracking Global L7 traffic analytics reporting per network, per device, & per application
Warranty	1 year hardware warranty with advanced replacement included
Ordering Information	MR84-HW Meraki MR84 Cloud Managed 802.11ac AP MA-INJ-5-XX Meraki Multigigabit 802.3at PoE Injector (XX = US/EU/UK/AU) MA-ANT-20 Meraki Dual-Band Omni Antennas MA-ANT-25 Meraki Dual-Band Patch Antenna MA-ANT-27 Meraki Dual-Band Sector Antenna AIR-ANT2513P4M-N= Dual-band, 4-port, 30° beam Note: Meraki Enterprise license required. For AIR-ANT2513P4M-N= antenna.