C6800-8P10G-XL Cisco Catalyst 6800 8 port 10GE with integrated DFC4-XL

Expansion module Cisco C6800-8P10G-XL Catalyst 6800 8 Ports 10GE SFP/SFP+ with integrated dual DFC4-XL Line Module Card

✓ Mã sản phẩm: C6800-8P10G-XL

Danh mục: Switch Cisco, Thiết Bị Mạng CISCO

Mô tả
Thông số kỹ thuật

Expansion module SWITCH CISCO C6800-8P10G-XL Catalyst 6800 8 Ports 10GE SFP/SFP+ with integrated dual DFC4-XL Line Module Card

Cisco® Catalyst® 6800 Supervisor Engine 6T is new plug-in bổ sung cho công cụ giám sát dòng. Supervisor Engine 6T được thiết kế để mang lại hiệu suất cao hơn, khả năng mở rộng tốt hơn và các tính năng hỗ trợ nâng cao phần cứng. Supervisor Engine 6Tích hợp chuyển đổi thanh ngang 6 Terabit cho phép nâng cao hiệu suất trên máy tính Khẳng định Cisco Catalyst 6807-XL ở server chờ chế độ.

Thông số kỹ thuật

Attribute	C6800-8P10G-XL
10GE portss	8 ports 1GE or 10GE Numbered left to right: – TenGigabitEthernet 1 to 8
Port groups	2 port groups (N/A) Port-group 1: – 1 to 4 Port-group 2: – 5 to 8 Performance Mode is not applicable to 8-port 10GE module
Performance Mode	N/A
Switch fabric connection	80 Gbps in 6807-XL and 6500-E chassis
Oversubscription	In both the C6807-XL and Catalyst 6500-E chassis: 8 ports line rate 1:1
Number of forwarding engines	1
Throughput (per module)	IPv4: up to 60 Mpps IPv6: up to 30 Mpps
Forwarding engine features	-Equipped with DFC4-EXL for distributed forwarding, supporting ◦ 1M IPV4 and MPLS Forwarding entries, 512K IPV6 entries ◦ 64K IPV4/IPV6 Multicast routes ◦ 256K ACL entries (shared between QoS and security) ◦ 2M NetFlow entries (32 port card, with 2 forwarding engines) ◦ 1M NetFlow entries (8/16 port card, with 1 forwarding engine) – Both models support a MAC Address Table of 128K – In addition to the increased NetFlow entries, supports Flexible NetfFlow, Sampled NetFlow and Egress NetFlow – Increased MPLS and VPLS performance of up to: ◦ 120Mpps for MPLS forwarding and up to 60Mpps for VPLS forwarding (32 port card, with 2 forwarding engines) ◦ 60Mpps for MPLS forwarding and up to 30Mpps for VPLS forwarding (8/16 port card, with 1 forwarding engine) – Support for 16K Bridge Domains, allowing the standard 4K VLANs to be reused across these bridge domains – IPv4 Internet Group Management Protocol Version 3 (IGMPv3) snooping in hardware – IPv6 Multicast Listener Discovery Version 2 (MLDv2) snooping in hardware – Protocol Independent Multicast (PIM) source registers in hardware – IPV4 and IPv6 in IPv6 tunneling, IPV4 and IPv6 in MPLS tunneling (6PE/6VPE) – IPv6 in IPv4 tunneling (Intra-Site Automatic Tunnel Addressing Protocol [ISATAP], 6to4, GRE) – Quality-of-Service (QoS) support for uniform, short pipe, and pipe mode tunnel; Hierarchical QoS – Fast Link Notification (FLN) for hardware port state detection with 50ms – MACsec (802.1ae) link-layer hardware AES 128 bit encryption – Location ID Separation Protocol (LISP) hardware encapsulation – Virtual Switch Header (VSH) and Virtual Network Tag (VNtag) hardware encapsulation for VSS and Instant Access
Queues	Receive: – 1p7q4t (default) – 2p6q4t (configurable) Transmit: – 1p7q4t (default) – 2p6q4t (configurable)
Queuing mechanisms	– Class of Service (CoS) based queue mapping – (Differentiated Service Code Point (DSCP) based queue mapping
Scheduler	Ingress Queuing: – Deficit Weighted Round Robin (DWRR) Egress Queuing: – Deficit Weighted Round Robin (DWRR) ◦ Weighted Random Early Detection (WRED) – Shaped Round Robin (SRR) ◦ Weighted Random Early Detection (WRED) – Class Based Weighted Fair Queuing (CBWFQ) ◦ 2 Level Traffic Shaping (HQoS) ◦ Low-Latency Queuing (LLQ)
Port buffers	– 500 MB per port (Egress) – 2.5 MB per port (Ingress)
Hardware multicast replication	– Ingress and Egress replication-mode – Approximately 20 Gbps per replication engine – 4 replication engines per module
Jumbo frame support	Up to 9216 bytes
Can be used to form VSS Virtual Switch Link	Yes (on all ports)
Can be used to form Instant Access Remote Switch Link	Yes (on all ports)
Maximum 10G port density per chassis (not including supervisor uplinks)	40 ports (6807-XL chassis) 88 ports (6513-E chassis) 64 ports (6509-E chassis) 40 ports (6506-E chassis) 24 ports (6504-E chassis) 16 ports (6503-E chassis)
Maximum port density per VSS (not including supervisor uplinks)	80 ports (6807-XL chassis) 176 ports (6513-E chassis) 128 ports (6509-E chassis) 80 ports (6506-E chassis) 48 ports (6504-E chassis) 32 ports (6503-E chassis)
Supervisor engines supported	Catalyst^® 6500 Supervisor Engine 2T and 2TXL
Chassis supported	– Cisco Catalyst 6807-XL chassis – Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E (NEBS) and 6513-E – Not supported in 6500 non-E Series chassis and 7600 Series Chassis
Slot requirements	– Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL chassis – Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E or 6509-V-E or chassis – Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassis
Onboard memory	2 GB default
Minimum IOS software release	15.2(1)SY
Physical specifications	– Occupies one slot in the Cisco Catalyst 6500 E-Series and 6807-XL chassis – Dimensions (H x W x D): 1.73 x 15.4 x 16.4 inches (4.39 x 39.11 x 41.65 cm) – Weight: ◦ 11.0 lb (5kg)
Power requirements	303.68 Watts