Cisco AIR-AP1815W-S-K9C

Model: Cisco AIR-AP1815W-S-K9C

Detail: Cisco AIR-AP1815W-S-K9C Aironet 1815W 802.11ac Wave 2 Access Point with Mobility Express, Reg Domain S ● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) ● Management console port (4-pin connector) ● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port.

Danh mục: Wireless Cisco

Mô tả
Thông số kỹ thuật

Tổng quan và đặc điểm của sản phẩm

Wireless Cisco

Bộ phát wifi Cisco Aironet AIR-AP1815w-S-K9C access point là bô phát wifi chuẩn 802.11 a/b/g/n/ac (Wave 2) với antena được thiết kế ở bên trong thuộc dòng Cisco Aironet wireless 1815 Access Point. Cisco Aironet AIR-AP1815w-S-K9C hỗ trợ cả 2 dải tần là 2.4 GHz 2×2 802.11b/g/n MU-MIMO và 5 GHz 2×2 802.11 a/n/ac (Wave 2) MU-MIMO.

Cisco AIR-AP1815w-S-K9C Access Point sử dụng công nghệ mới nhất 802.11ac Wave 2, hỗ trợ công nghệ multiple-input multiple-output (MIMO) cung cấp tốc độ lên tới 867Mbps cho công suất và độ tin cậy cao hơn.

Cisco wireless AIR-AP1815w-S-K9C cung cấp kết nối có dây và không dây cho các doanh nghiệp với tốc độ cao và độ bảo mật cao. AP cho phép nhân viên có thể truy cập dữ liệu, thoại, video và điện toán đám mây từ xa, phù hợp với các văn phòng công ty có số lượng laptop điện thoại di động hay các thiết bị không dây lớn và cần tốc độ truy cập cao.

Thiết bị Wifi Cisco AIR-AP1815W-S-K9C

Part Number	AIR-AP1815W-S-K9C
Authentication and security	● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2) ● 802.1X, RADIUS authentication, authorization and accounting (AAA) ● 802.11r ● 802.11i
Software	● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.4 or later ● Cisco Mobility Express
Supported WLAN COntrollers	● Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 series Wireless Controllers, ● Cisco Mobility Express
Maximum clients	● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac	● 2×2 single-user/multiuser MIMO with two spatial streams ● Maximal ratio combining (MRC) ● 20-, 40-, and 80-MHz channels ● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic shift diversity (CSD) support
Ethernet ports	● Authentication with 802.1X or MAC filtered ● Dynamic VLAN or per port ● Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future Availability)	● Integrated Bluetooth 4.1 (including BLE) radio ● Maximum transmit power: 4 dBm ● Antenna gain: 2 dBi
Integrated antennas	● 2.4 GHz, gain 2 dBi ● 5 GHz, gain 3 dBi
Interfaces	● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) ● Management console port (4-pin connector) ● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port: ◦ PoE out provides 802.3af (class 0) when access point is powered by 802.3at, or no output when powered by 802.3af ● One passive pass-through port RJ-45 (back to bottom)
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)	● Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in (89 x 140 x 31.5 mm)
Weight	● Access point without mounting bracket or any other accessories: 10 oz (280 g)
Environmental	● Operating ◦ Temperature: 32° to 104°F (0° to 40°C) ◦ Humidity: 10% to 90% (non-condensing) ◦ Max. altitude: 9843 ft (3,000 m) @ 40°C ● Non-operating (storage and transportation) ◦ Temperature: -22° to 158°F (-30° to 70°C) ◦ Humidity: 10% to 90% (non-condensing) ◦ Max. altitude: 15,000 ft (4,500 m) @ 25°C
System	● 1 GB DRAM ● 256 MB flash ● 710 MHz quad-core
Powering options	● 802.3af/at Ethernet switch ● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Power draw	● 8.5W (maximum, without PoE out)
Physical security	● Torx security screw, included with the access point ● Kensington lock slot to lock device to mounting bracket.
Mounting	● Included with the access point: mounting bracket AIR-AP-BRACKET-W3
Accessories	● Mounting bracket: AIR-AP-BRACKET-W3= (available as spare) ● Spacer kit: AIR-AP1815W-KIT= (sold separately), includes spacer and RJ-45 jumper cable ● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 20 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
Warranty	Limited Lifetime Hardware Warranty