C6800-32P10G Cisco Catalyst 6800 32 port 10GE with integrated dual DFC4

Cisco C6800-32P10G Catalyst 6800 32 port 10GE SFP/SFP+ with integrated dual DFC4 Line Module Card

✓ Mã sản phẩm: C6800-32P10G

Danh mục: Switch Cisco, Thiết Bị Mạng CISCO

Mô tả
Thông số kỹ thuật

SWITCH CISCO C6800-32P10G Catalyst 6800 32 port 10GE SFP/SFP+ with integrated dual DFC4 Line Module Card

Cisco® Catalyst® 6800 Supervisor Engine 6T is new plug-in bổ sung cho công cụ giám sát dòng. Supervisor Engine 6T được thiết kế để mang lại hiệu suất cao hơn, khả năng mở rộng tốt hơn và các tính năng hỗ trợ nâng cao phần cứng. Supervisor Engine 6Tích hợp chuyển đổi thanh ngang 6 Terabit cho phép nâng cao hiệu suất trên máy tính Khẳng định Cisco Catalyst 6807-XL ở server chờ chế độ.

Thông số kỹ thuật

Attribute	C6800-32P10G
10GE portss	32 ports 1GE or 10GE Numbered left to right: – Top row has odd numbered ports: TenGigabitEthernet 1 to 31 – Bottom row has even numbered ports: TenGigabitEthernet 2 to 32
Port groups	4 port groups 2 port-sets per port group Port-group 1: – 1, 3, 5, 7 – 9,11, 13, 15 Port-group 2: – 2, 4, 6, 8 – 10, 12, 14, 16 Port-group 3: – 17, 19, 21, 23 – 25, 27, 29, 31 Port-group 4: – 18, 20, 22, 24 – 26, 28, 30, 32
Performance Mode	Yes per port-group
Switch fabric connection	160 Gbps in 6807-XL chassis 80 Gbps in 6500-E chassis
Oversubscription	In C6807-XL: 32 ports: oversubscription mode 2:1 16 ports: performance mode 1:1 In Catalyst 6500-E: 32 ports: oversubscription mode 4:1 16 ports: performance mode 2:1
Number of forwarding engines	2
Throughput (per module)	IPv4: up to 120 Mpps IPv6: up to 60 Mpps
Forwarding engine features	– Comes equipped with DFC4-E for distributed forwarding, supporting: ◦ 256K IPV4 and MPLS Forwarding entries, 128K IPV6 entries ◦ 64K IPV4/IPV6 Multicast routes ◦ 64K ACL entries (shared between QoS and security) ◦ 1M NetFlow entries (32 port card, with 2 forwarding engines) ◦ 512K NetFlow entries (8/16 port card, with 1 forwarding engine) – Both models support a MAC Address Table of 128K – In addition to the increased NetFlow entries, supports Flexible NetfFlow, Sampled NetFlow and Egress NetFlow – Increased MPLS and VPLS performance of up to: ◦ 120Mpps for MPLS forwarding and up to 60Mpps for VPLS forwarding (32 port card, with 2 forwarding engines) ◦ 60Mpps for MPLS forwarding and up to 30Mpps for VPLS forwarding (8/16 port card, with 1 forwarding engine) – Support for 16K Bridge Domains, allowing the standard 4K VLANs to be reused across these bridge domains – IPv4 Internet Group Management Protocol Version 3 (IGMPv3) snooping in hardware – IPv6 Multicast Listener Discovery Version 2 (MLDv2) snooping in hardware – Protocol Independent Multicast (PIM) source registers in hardware – IPV4 and IPv6 in IPv6 tunneling, IPV4 and IPv6 in MPLS tunneling (6PE/6VPE) – IPv6 in IPv4 tunneling (Intra-Site Automatic Tunnel Addressing Protocol [ISATAP], 6to4, GRE) – Quality-of-Service (QoS) support for uniform, short pipe, and pipe mode tunnel; Hierarchical QoS – Fast Link Notification (FLN) for hardware port state detection with 50ms – MACsec (802.1ae) link-layer hardware AES 128 bit encryption – Location ID Separation Protocol (LISP) hardware encapsulation – Virtual Switch Header (VSH) and Virtual Network Tag (VNtag) hardware encapsulation for VSS and Instant Access
Queues	Receive: – 1p7q4t (default) – 2p6q4t (configurable) Transmit: – 1p7q4t (default) – 2p6q4t (configurable)
Queuing mechanisms	– Class of Service (CoS) based queue mapping – (Differentiated Service Code Point (DSCP) based queue mapping
Scheduler	Ingress Queuing: – Deficit Weighted Round Robin (DWRR) Egress Queuing: – Deficit Weighted Round Robin (DWRR) ◦ Weighted Random Early Detection (WRED) – Shaped Round Robin (SRR) ◦ Weighted Random Early Detection (WRED) – Class Based Weighted Fair Queuing (CBWFQ) ◦ 2 Level Traffic Shaping (HQoS) ◦ Low-Latency Queuing (LLQ)
Port buffers	Oversubscription mode: – 250 MB per port (Egress) – 1.2 MB per port (Ingress) Performance mode: – 500 MB per port (Egress) – 2.5 MB per port (Ingress)
Hardware multicast replication	– Ingress and Egress replication-mode – Approximately 20 Gbps per replication engine – 8 replication engines per module
Jumbo frame support	Up to 9216 bytes
Can be used to form VSS Virtual Switch Link	Yes (on all ports)
Can be used to form Instant Access Remote Switch Link	Yes (on all ports)
Maximum 10G port density per chassis (not including supervisor uplinks)	160 ports (6807-XL chassis) 352 ports (6513-E chassis) 256 ports (6509-E chassis) 160 ports (6506-E chassis) 96 ports (6504-E chassis) 64 ports (6503-E chassis)
Maximum port density per VSS (not including supervisor uplinks)	320 ports (6807-XL chassis) 704 ports (6513-E chassis) 512 ports (6509-E chassis) 320 ports (6506-E chassis) 192 ports (6504-E chassis) 128 ports (6503-E chassis)
Supervisor engines supported	Catalyst^® 6500 Supervisor Engine 2T and 2TXL
Chassis supported	– Cisco Catalyst 6807-XL chassis – Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E (NEBS) and 6513-E – Not supported in 6500 non-E Series chassis and 7600 Series Chassis
Slot requirements	– Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL chassis – Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E or 6509-V-E or chassis – Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassis
Onboard memory	2 GB default
Minimum IOS software release	15.2(1)SY
Physical specifications	– Occupies one slot in the Cisco Catalyst 6500 E-Series and 6807-XL chassis – Dimensions (H x W x D): 1.73 x 15.4 x 16.4 inches (4.39 x 39.11 x 41.65 cm) – Weight: ◦ 14.3 lb (6.5kg)
Power requirements	587.60 Watts